Product Specs
Engine Specifications
- Minimum Rating
- 4800 kVĀ·A
- Maximum Rating
- 4800 kVĀ·A
- Emissions
- IMO Tier II
- Displacement
- 20382 inĀ³
- Bore
- 13.4 in
- Aspiration
- Turbocharged Aftercooler
- Stroke
- 18.1 in
- Weight
- 187000 lb
- Engine Control
- Electronic
Dimensions
- Width
- 102.4 in
- Height
- 213.1 in
- Length
- 425 inĀ³
Standard Equipment
-
- Engine
-
- Motor-driven barring gear, fitted on engine
- Emergency shutdown equipment with pushbutton for manual emergency stop
-
- Cylinder Heads
-
- Fuel injector and integrated gas admission valve with easy service and maintenance access
- Cylinder pressure sensors for highest operational reliability and efficiency, replacing conventional knocking sensor technology
- Piston, rings and liners designed for operation on gas and liquid fuels
-
- Turbocharger
-
- Optimized engine efficiency in gas and diesel operation
- Blow-off valve and waste gate technology for optimized air-fuel ratio control
-
- Gas System
-
- Double-walled gas piping to support an inherently safe engine room concept
- Leakage detection
- Gas valve unit
- Segmented gas detection system on request
-
- Micro Pilot Fuel Injection System
-
- Gear driven high pressure fuel pump and filter system with easy service access
- Reliability combined with service and maintenance simplicity, through individual ignition fuel injector and āin-cylinder headā integrated ignition fuel return pipes.
-
- Exhaust System
-
- Front-mounted turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine),
- Expansion joint separate
- Separate silencer and spark arrester
-
- Fresh Cooling Water System
-
- HT pump, fitted on engine
- LT pump, separate, vertical design, electric motor driven
- HT thermostat, remote-mounted, electric controlled
- Cooling water preheating equipment, fitted on base frame
-
- Lubricating Oil System
-
- Plate cooler, fitted on engine
- Force pump, fitted on engine
- Pre-lubrication pump, fitted on base frame, electric motor driven
- Automatic back-flushing filter
- Duplex filter with differential pressure indication, fitted on engine
- Pressure control valve, fitted on engine
- Thermostat, remote-mounted, electric controlled
-
- Connections
-
- Set of connecting parts between flange coupling and flywheel
- Flexible flange coupling between engine and generator
- Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator
- Mounting of engine and generator on the base frame
- Set of bonded rubber rails for resilient mounting of the base frame
- Set of flexible pipe connections
-
- Instrumentation
-
- Gauge board with liquid-dampened pressure gauges for: fuel, lubricating oil, fresh water, starting air and charge air.
- On-engine thermometers for fuel, lubricating oil, fresh water and charge air
- Electric remote speed indicator
- Turbocharger and remote speed indicator
- Exhaust gas temperature indicator
-
- Monitoring
-
- Manual control on engine, including: control panel with start/stop key, speed setting device, mechanical shutdown device, changeover of control functions from engine to remote control
- Starting solenoid valve on engine, 24 V DC
- Separate electronic speed governor