Product Specs
General
- Bore
- 121 mm (4.75 in)
- Stroke
- 152 mm (6.0 in)
- Displacement
- 10.5 L (638 in³)
- Engine Configuration
- Engine - Continuous
- Aspiration
- Turbocharged Aftercooled (TA)
Power Rating
- Minimum Power
- 145 hp
- Maximum Power
- 211 hp
- Frequency
- 1800 rpm
Engine Dimensions - Approximate
- Length
- 1539 mm (60 in)
- Height
- 1261 mm (50 in)
- Width
- 978 mm (38 in)
- Weight - Net Dry
- 948 kg (2090 lb)
Standard Equipment
- 
            
            - Air Inlet System
- 
                        - Air cleaner
- Air cleaner rain cap
- Service indicator
 
 
- 
            
            - Control System
- 
                        - Hydra-mechanical governor
 
 
- 
            
            - Cooling System
- 
                        - Thermostats and housing
- Jacket water pump
- Aftercooler water pump
- Aftercooler core
 
 
- 
            
            - Exhaust System
- 
                        - Watercooled exhaust manifolds
- Dry exhaust elbow
 
 
- 
            
            - Flywheels & Flywheel Housings
- 
                        - SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
 
 
- 
            
            - Fuel System
- 
                        - Gas pressure regulator
- Natural gas carburetor
 
 
- 
            
            - Ignition System
- 
                        - Altronic V ignition system
 
 
- 
            
            - Instrumentation
- 
                        - Service meter
 
 
- 
            
            - Lube System
- 
                        - Crankcase breather — top mounted
- Oil cooler
- Oil filter
- Oil pan — full sump
- Oil filler and dipstick
 
 
- 
            
            - Mounting System
- 
                        - Engine supports
 
 
- 
            
            - Protection System
- 
                        - Shutoffs
 
 
- 
            
            - General
- 
                        - Paint — Cat yellow
- Crankshaft vibration damper and pulley
- Lifting eyes
 
 
Attachments
- 
            
            - Charging System
- 
                        - Battery chargers
- Charging alternators
- Ammeter gauge
- Ammeter gauge and wiring
 
 
- 
            
            - Control System
- 
                        - PSG Woodward governor
- Vernier and positive locking control
 
 
- 
            
            - Cooling System
- 
                        - ATAAC conversion
- Aftercooler group
- Expansion tank
- Heat exchanger and expansion tank
- Radiator
- Blower fan for customer supplied radiators
- Suction fan for customer supplied radiators
- Fan drives for customer supplied radiators
- Fan adapter for customer supplied radiators
- Belt tightener
 
 
- 
            
            - Exhaust System
- 
                        - Flexible fittings
- Elbows
- Flanges
- Pipes
- Rain caps
- Mufflers
 
 
- 
            
            - Fuel System
- 
                        - Low pressure gas conversion
- Fuel filter
 
 
- 
            
            - Ignition System
- 
                        - Altronic III
- CSA shielded ignition
- Wiring harness
- Dual timing
 
 
- 
            
            - Instrumentation
- 
                        - Gauges and instrument panels
 
 
- 
            
            - Lube System
- 
                        - Lubricating oil
 
 
- 
            
            - Mounting System
- 
                        - Vibration isolators
 
 
- 
            
            - Power Take-offs
- 
                        - Auxiliary drive pulleys and auxiliary pump
- Enclosed clutch and clutch support
- Flywheel stub shaft
- Front stub shaft
 
 
- 
            
            - Protection System
- 
                        - Mechanical shutoff
- Gas valves
 
 
- 
            
            - Starting System
- 
                        - Air starting motor
- Air pressure regulator
- Air silencer
- Electric starting motors with start switch installed/ shipped loose
- Starting aids
- Battery sets
 
 
- 
            
            - General
- 
                        - Tool set
 
 

