Product Specs
Power Rating
- Maximum Power
- 1350 hp
- Maximum Torque
- 4548 lb-ft @ 1400 rpm
- Rated Speed
- 1800-2100 rpm
- Minimum Power
- 950 hp
Emission Standards
- Emissions
- U.S. EPA Tier 2 Equivalent
Engine Dimensions - Approximate
- Length
- 75.5 in
- Width
- 58.2 in
- Height
- 51.9 in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 6495 lb
General
- Engine Configuration
- V-12, 4-Stroke-Cycle Diesel
- Bore
- 5.7 in
- Stroke
- 6.4 in
- Displacement
- 1958.9 in³
- Compression Ratio
- 16.5:1
- Aspiration
- Turbocharged Aftercooled (TA)
- Combustion System
- Direct Injection
- Rotation from Flywheel End
- Counterclockwise
Standard Equipment
-
- Air Inlet System
-
- Twin Turbocharged Aftercooled
- Air-to-Air Aftercooled
-
- Control System
-
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
-
- Cooling System
-
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
- Exhaust System
-
- Exhaust manifold, dry
- Optional exhaust outlet
-
- Flywheels And Flywheel Housing
-
- SAE No. 1 flywheel housing
-
- Fuel System
-
- MEUI injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
-
- Lube System
-
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
-
- General
-
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request