Product Specs
Generator Set Specifications
- Maximum Rating
- 100 ekW - 200 ekW (125 kVA - 250 kVA)
- Speed
- 1,500 rpm / 1,800 rpm
Engine Specifications
- Emissions
- IMO II, IMO III (SCR required) U.S. EPA Tier 3, EU Stage V, China II
- Configuration
- Inline 6, 4-Stroke Cycle Diesel
- Displacement
- 428 in³
- Aspiration
- Turbocharged / Aftercooled
- Governor
- Electronic (A5 ECM)
- Bore
- 4.13 in
- Stroke
- 5.31 in
- Refill Capacity
- Lube Oil System w/oil filter change: 21 L / 5.6 gal
- Oil Change Interval
- 500 hrs
- Rotation from Flywheel End
- Counterclockwise
- Cooling
- Heat exchanger, Seperate Circuit Keel Cooled, Combined Circuit Keel Cooled, Radiator Cooled
Generator Set Dimensions
- Length
- 76.3 in /1,940 mm
- Height
- 49.7 in / 1,263 mm
- Engine Dry Weight
- 3355 lb / 1,522 kg
Generator Set Dimensions and Weights - Dependent on Generator Type
- Width
- 38.0 in / 965 mm
Standard Equipment
-
- Standard Equipment
-
- Common Rail Fuel System
- Mounted Air Cleaner
- Integral Plate Type Oil Cooler
- Isolated Sump
- Anti-vibration Mounts
- Gear Driven Sea Water Pump
- Gear Driven Jacket Water Pump
- Safety Shutdowns
- Water Cooled Exhaust Manifold
- Watercooled Turbocharger
Attachments
-
- Optional Attachments
-
- Marine Classification Society (MCS) Approval
- Generator Space Heater
- Engine Jacket Water Heater
- Duplex Oil Filters
- Duplex Fuel Filters
- Double Wall High Pressure Fuel Lines
- Additional Starter Motor
- Fuel Cooler (Radiator cooled only)
- Charging Alternator
- PTO Drive
- Service Parts Kit
- Generator Droop Kit
- Glow Plugs to Aid Cold Weather Starting