C18 ACERT Tier 4 Final
Please contact your nearest store for rates and other details.
Product Specs
Engine Specifications
- Maximum Rating
- 800 BHP
- Emissions
- U.S. EPA Non-road Tier 4 Final
- Displacement
- 1104 in³
- Minimum Rating
- 755 BHP
- Bore
- 5.7 in
- Stroke
- 7.2 in
- Rated Speed
- 1800 r/min
- Aspiration
- Turbocharged-Aftercooled
- Governor and Protection
- ADEM A4
- Engine Weight - Net Dry
- 3482 lb
- Oil Change Interval
- 250 - 500
- Rotation from Flywheel End
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 0 or SAE No. 1
- Flywheel Teeth
- 136 (SAE 0), 113 (SAE 1)
Capacity for Liquids
- Minimum Cooling System - Engine Only
- 7.1 gal (US)
Dimensions
- Length
- 60.2 in
- Width
- 37.8 in
- Height
- 51 in
Standard Equipment
-
- Air Inlet System
-
- Turbocharged Aftercooled
-
- Control System
-
- Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
-
- Cooling System
-
- Vertical outlet thermostat housing, centrifugal water pump
-
- Exhaust System
-
- Dry exhaust manifold, Diesel Oxidation Catalyst (DOC)
-
- Flywheels And Flywheel Housing
-
- SAE 0 and SAE 1 flywheel housing
-
- Fuel System
-
- MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
-
- Lube System
-
- Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, high-capacity center, and high-capacity front)
-
- Power Take Off
-
- SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
-
- General
-
- Paint: Cat yellow; vibration damper; lifting eyes